manualshive.com logo in svg

AJA BRIDGE LIVE, Installation And Operation Manual

Share
Download
AJA BRIDGE LIVE Installation And Operation Manual Download Page 47

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 47 www.aja.com

 

Chapter 6 – Basic Use Case: Simultaneous Bi-

Directional Encoding and Decoding

NOTE:  BRIDGE LIVE supports simultaneous bi-directional encoding and decoding with 

HD/SD. However, simultaneous bi-directional encoding and decoding is not 

supported with UltraHD. 

Receive up to three remote HD sources at a production studio using the public 

Internet and return a program feed to a remote truck. 
The production studio receives the incoming encoded stream sources from 

the remote truck and decodes them into SDI for editing and production, while 

simultaneously returning to the remote truck an encoded program feed. 
The remote truck in turn receives and decodes the returned program feed for 

program monitoring over SDI, while continuing to encode and transmit up to 

three HD sources to the production studio. 

Overview

This use case describes a scenario in which two BRIDGE LIVE devices are being 

used. One device is installed in a Production Studio while a second device is 

installed in a Remote Truck. 

Remote Truck Role

The Remote Truck has an HD camera feeding an SDI input to BRIDGE LIVE. The 

BRIDGE LIVE device encodes the HD input to H.264 and sends it as a stream to the 

Production Studio. 
Simultaneously, the BRIDGE LIVE in the Remote Truck is receiving a program feed 

from the Production Studio as an H.264 stream and decoding it for output into 

HD for an SDI monitor. 

Production Studio Role

The BRIDGE LIVE installed in the Production Studio is receiving a camera feed 

from the Remote Truck as an H.264 stream input. The BRIDGE LIVE device decodes 

the H.264 stream into HD for contribution to the facility SDI router. 
At the same time, the Production Studio is feeding its HD program return signal 

to an SDI input on its BRIDGE LIVE device, encoding it into H.264, and streaming it 

to the Remote Truck. 

Summary of Contents for BRIDGE LIVE












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands