KONA LH Capture, Display, Convert v14.3 35 www.aja.com
VOut Filters
These controls enable/disable output capabilities in the QuickTime VOut filter.
This filter is used by older applications that are built on legacy QuickTime
architecture such as FCP7, AJA TV, VTR Exchange, and older versions of After
Effects. Boxes that are checked will define what framerate and resolution types
will appear in the list of available formats in the AJA hardware. For example, if
25/50 is unchecked, then all resolution/framerate combinations with 25 or 50
fps will not appear in the list of capabilities for the installed AJA hardware, when
using software that relies on the QuickTime VOut filter.
Geometry Checkboxes
The 2K checkbox needs to be enabled for that format to be presented and
selectable in applications like AJA VTR Xchange and AJA TV.
Audio Setup Screen
The Audio Setup Screen shows the current settings for the analog audio output,
allowing you to re-configure it when desired. Different screens are displayed
depending on the KONA product.
Figure 20. AJA Control Panel, Audio Setup Screen
Audio Monitor
Use the drop-down menu to select which two audio channels to monitor. Select
from Ch 1-2 through Ch 7-8.
NOTE: This setting only applies to dual channel monitoring environments.
