KONA LH Capture, Display, Convert v14.3 16 www.aja.com
VTR SDI Out, and one from KONA LHi SDI Out to the VTR SDI In. The KONA
LHi SDI connections have embedded audio so the VTR must be configured
accordingly.
5. If you have an AES/EBU-ready audio monitoring system, then connect the
two channels of AES/EBU output from KONA LHi’s XLR connectors (channels
1 and 2) to the monitoring system AES/EBU inputs. If you instead have an
analog audio monitoring system, you can use either the XLR balanced audio
connectors or the two RCA-style unbalanced stereo output jacks on the
Optional KLHi-Box for output.
KONA LHe Plus Cable Connections
Figure 6. Typical LHe Plus System Shown with Optional KL-Box
Digital VTR with SDI Inputs
RS422
Machine
Control
SDI Video
with Embedded
Audio In/Out
External Reference
Audio System
AES/EBU Audio In/Out
to Monitor System
Reference Monitors
Analog Audio
Inputs/Outputs
(Balanced)
RAID storage
Computer Monitor
Optional
Genlock
Reference
Video Monitor
Component
Video
Workstation
AJA KONA LHe Plus Card
Connect to
KL-Box Using
Cables and Instructions
supplied with it
Installed
inside the
computer
HBA for connection
of external storage
See
Figure 1 on page 10
for KONA LH cable connector identification.
Typical System
Figure 6 on page 16
shows typical system interconnections for KONA LHe Plus
with digital A/V sources. Your system may differ depending on VTRs, audio
monitoring, and video monitoring.
1. If desired, connect your house reference sync to the KONA LHe Plus Ref
Loop connector (BNC). The second KONA Ref Loop connector on the KL-
Box (if used) can be connected to the VTR or terminated with a 75-ohm
terminator.
2. Connect a Video Monitor to the KONA LHe Plus Component Analog Video
Out BNC connectors (preferred), or instead connect to a composite monitor.
