3
|
01-2811700 • ajproducts.ie
7. OIL AND LUBRICANT RECOMMENDATIONS
Hydraulic oil: ISO VG 22
Lubricant: Multipurpose lubricating grease for example: ARAL Aralub 2, BP
Multipurpose lubricating grease L2, Energrease LS 2, ESSO Beacon 2
The oil level should be checked every six months. The following oil types are to
be used depending on the temperature conditions.
Temperature
Oil
-5°C – approx. +45° C
L-HL 68 Hydraulic oil (equivalent to ISO VG68)
-15°C - approx. - 5° C
L-HL 46 Hydraulic oil (equivalent to ISO VG46)
Waste oil must be disposed of in accordance with legal provisions!
8. MALFUNCTIONS AND THEIR CAUSES
Failure
Cause
Elimination
Load is too heavy, overload
valve is
actuated
Reduce the load
Lowering valve does not close
any
more or the valve face is not
sealed because of dirt
Clean or replace it
Hydraulic pump does
not work
Check the pump
Faulty wiring
Check the wiring
referring to the
actual wiring
diagram.
Battery charge is
insufficient.
Charge the battery
The fork or other parts
are obstructed
Check all moving
parts
Lowering valve not adjusted
properly.
Adjust it properly
Leakage in the hydraulic
system
Seal!
Lowering valve does not close
any
more or the valve unit is not
sealed
because of dirt
Clean or replace
Incorrect valve set-up.
Adjust lowering
valve
Pressure relief valve (pump)
is leaky
(pump turns slowly
backwards.)
Clean or replace the
valve
Oil loss on hydraulic
cylinder
Sealing elements are worn
Replace sealing
elements
The raised load is
lowered too slowly
Temperature too low – the
hydraulic
system oil is too thick
Find a warmer
location
Insufficient oil in the tank
Refill with oil (while
the fork is lowered)
9. DISPOSAL
After placing out of service, the high-lift pallet truck parts must be
disposed of or
recycled in accordance with legal provisions.
10. SPECIFICATIONS
Capacity (kg)
1000
Platform (mm)
800×1200
Min. Platform Height (mm)
430
Max. Plattform Height (mm)
1220
Lifting stroke (mm)
790
Motor (KW)
0.7
Work cycle of hydraulic power
pack
3 times of table moving up-down
per 10 min.
Approx. numbers of lifting at
full charge and with full load
(times)
50
Approx. time required lifting
up table (sec))
24
Wheel (mm, diameter)
200
Handle height (mm)
1100
Weight (kg)
225
Note: All the information provided here is based on the data available at the time
of going to press. The manufacturer reserves the right to modify this product
at any time and without prior notice without this giving rise to liability claims.
Please always remember this and check the situation at the time.
