Page 4
Recommended Items for Completion
•
Power System
o
Electric Motor (If you choose to go electric.)
▪
2400+ Watt 8S/12S or Equivalent
▪
100-120 Amp ECS
▪
12”
ESC (Servo) Wire Extensions
▪
8s-12s Battery
▪
Prop suited for the motor you choose. (20
x10, …)
▪
3” (76mm) Spinner
o
Gas Engine (If you choose to go gasoline.)
▪
30-40cc
▪
Standard sized metal geared throttle servo.
▪
Ignition Shut Off
▪
Ignition/Receiver Battery
▪
12-16 oz Gasoline Safe Fuel Tank
▪
Gasoline Safe Fuel Line
▪
Fuel Dot
▪
Fuel Filter
▪
2x
12” Servo Wire Extensions
▪
Prop suited for the engine you choose.
(20x8, 20x9…)
▪
3” (76mm)
Spinner
•
Aileron Servos
o
2x 250 oz/in Metal Geared, (Hitec HS-7955TG Recommended)
o
2x 6”
Servo Wire Extensions (to receiver)
o
2x 1.5
” Servo Arm for
3D Aerobatics (Or a heavy duty servo arms for sport flying.)
•
Rudder Servo
o
1x 250 oz/in Metal Geared, (Hitec HS-7955TG Recommended)
▪
2.5”
Double Servo Arm for a Pull-Pull cable setup.
•
Elevator Servo
o
This model can be configured with 1 or 2 elevator servos.
250 oz/in Metal Geared, (Hitec HS-7955TG Recommended)
o
1.5” Servo Arm for
3D Aerobatics (Or a heavy duty servo arms for sport flying.)
o
24” servo wire extensions
(1 or 2)
•
Radio System
o
5 or 6 channel full range radio system
o
Power Switch
o
Receiver Battery
o
Vibration padding for receiver and receiver battery.
AJ flies this airframe with the
following equipment:
AJ5230-20P/205KV 12S
Falcon 20x10 prop
Jeti Mezon 120 or Castle Ice 100
ESC
(2) Thunder Power 6S 3300 mAh
Elite 55C LiPo main packs
Castle Pro BEC
Thunder Power 2S 2100 mAh G8
Pro-lite+ 25C
Futaba 9177 servos on
Elevator/Rudder
Futaba 9452 servoc on Ailerons
