Page 21
Trim the covering in on the fuselage exposing the canopy
mounting holes.
Enlarge the hole in the canopy mounting tab to receive
the 3mm blind nuts. Use a washer and machine screw to
draw the blind nut into the canopy mounting tab.
Secure the canopy to the fuselage with the 3mm thumb
screws and flat washers.
Use nylon zip ties to secure the ESC to the bottom or side
of the motor box. We recommend putting a small piece
of foam between the ESC and motor box to dampen
vibrations.
Place hook and loop tape to the battery tray and your
battery. Loop hook and loop straps around the battery.
We recommend using at least a 1” strap if you intend to
do high G, 3D maneuvers.
