Aisino RCK-600 User Guide
Incomplete printout?
① Check manual settings
Check card software design layout matches card dimensions.
Check the landscape/portrait orientation in the driver.
② Check interface cable
If the text is printed in strange colors, use the USB cable supplied with the printer.
Check secure and proper connection between printer and your computer.
Try another cable.
③ Check if the printer is clean
See Section
2.3 to clean/replace cleaning rollers.
④ Check if cards are clean
Take precautions to keeps cards free from dust and contamination.
⑤ Check ribbon and retransfer film
Check if ribbon and retransfer film are installed properly. Check that the ribbon and
retransfer film are running smoothly.
⑥ Check print head
If a straight white line(s) travels across the length of your card, the print head may be dirty
or defective. If the problem persists after cleaning, please contact your
Aisino reseller
.
Card bent?
① See Chapter 3 to change from Normal Mode to User Mode.
② Press the
▼
key until LCD prompts [Card Setup]
.
Then press the
SET Key
.
③ Press the
▼
key until LCD prompts [Decurl Time(s)]. Then press the
SET Key
.
④ Select the 0
-
5 seconds flattening time to correct bending card. 0 value represents no
flattening.
81
