10
INSTALLING THE POWER SUPPLY
The AutoChlor® power supply is mounted on a wall using the mounting bracket and fi ttings
supplied. After securing the bracket in the appropriate position relative to your needs, the
power supply is hung on the bracket and locked into position by ensuring that the unit slips
into the slots provided on the mounting bracket.
It is preferable that the power supply is mounted in a location where it is protected from
accidental water spray and inclement weather. It is strongly recommended that the unit is also
protected and screened from the harsh sun, but in such a way that air fl ows freely through the
structure and does not impede the natural airfl ow through the power supply.
You should also ensure that the power supply is not used as a shelf to store or pack objects,
as this can also impede the air fl ow, causing overheating and/or damage to the unit that is not
covered by warranty.
Mount the power supply so that you can see and reach the various controls and so that the cell
lead has a comfortable margin to reach the cell terminal posts. Our recommendation is that the
power supply is mounted slightly higher and to one side of the fi lter plant to allow easy access
(refer to Fig. 3).
1. Pump
2. Filter
3. Water heater
4. Power supply
for chlorine
generator
5. Chlorine
generator
electrode
1
2
4
5
3
Fig. 3
Summary of Contents for AutoChlor Classic LS Series
Page 8: ...8 ...
Page 9: ...9 Convenient automatic inline salt water chlorination ...
