22
PROBLEM
REASON
SOLUTION
The high salinity light is on
or flashing
1. Pool salinity is too high
2. Chlorine generator is faulty
1. Have the salinity level tested
by pool professional and
decrease if necesssary
2. Contact dealer or AIS
Water.
The low salinity light is on
or flashing
1. Water salinity is too low
2. Electrode is calcified
3. Faulty electrode
1. Have the salinity level
tested by pool professional
and increase if necessary
2. Clean electrode
(see maintenance)
3. Have the electrode
tested and replace
if necessary
There is a white powdery
material on the pool
bottom.
Excessive water
hardness.
Test the water chemistry and
adjust accordingly.
Circuit breaker is tripping.
1. Mains power surge.
2. Fault with shorted
electrodes.
3. Fault with power supply
1. Set machine to off and
push circuit breaker.
2. a) Visually inspect
electrode and check for
foreign or conductive
surfaces. If found, remove
and clean cell.
b) Check electrode plates
are not contacting/
touching each other. If
yes, replace cell.
3. Contact dealer or AIS
Water.
TROUBLESHOOTING GUIDE
Summary of Contents for AutoChlor Classic LS Series
Page 8: ...8 ...
Page 9: ...9 Convenient automatic inline salt water chlorination ...
