background image

TURNING ON THE AIR CONDITIONER

       
Press the START/STOP button  (1)  to turn on the air conditioner.  After connecting to the 

power supply, The indicator (A) on the air conditioner light up, indicating that the air

conditioner is in the standby status. Please note that LCD operation display (13) will 
always show the last mode of  operation  and  the 

function used.  If you 

want to change the  co ntr ol  set tin gs,  proceed according to the following instructions. 
Otherwise, the air conditioner will start and operate in the same mode and functions prior to 

being turned off. 

VENTILATING OPERATION

Select the ventilating mode by pressing MODE button (2). Switch to the desired 
fan speed by pressing FAN speed button (4).

COOLING OPERATION

Select the COOLING mode by pressing MODE button (2). Switch to the desired 
FAN SPEED by pressing button (4). Select suitable temperature 
setting.

COOLING OPERATION WITH AUTO FAN MODE

This operation starts with the highest air flow in order to quickly lower the room 
temperature. It will then automatically switch to the low air flow to quietly maintain 
the selected temperature.

HEATING OPERATION 
    

Select the HEATING mode by pressing MODE button (2). Switch to the
desired FAN SPEED or to AUTO FAN by pressing FAN button (4). Select
suitable temperature setting.

 previous 

OPERATION PROCEDURE

HEATING OPERATION WITH AUTO FAN MODE

       
This operation starts with the highest air flow in order to quickly raise the room 
temperature. It will then automatically switch to a lower air flow to quietly maintain 
the selected temperature. HEATING with AUTO FAN will automatically provide 
the user with the HOT KEEP function. The fan will be turned off when the indoor 
coil temperature is not sufficiently hot to prevent uncomfortable cold air drafts.

HOUR

TEMP

MODE

SET

TIMER

I FEEL/RM

ION/FRESH

SLEEP

CLEAR

I FEEL/RM

ION/FRESH

HOUR

TEMP

MODE

SET

TIMER

SLEEP

CLEAR

I FEEL/RM

ION/FRESH

HOUR

TEMP

MODE

SET

TIMER

SLEEP

CLEAR

I FEEL/RM

ION/FRESH

HOUR

TEMP

MODE

SET

TIMER

SLEEP

CLEAR

I FEEL/RM

ION/FRESH

HOUR

TEMP

MODE

SET

TIMER

SLEEP

CLEAR

I FEEL/RM

ION/FRESH

HOUR

TEMP

MODE

SET

TIMER

SLEEP

CLEAR

8

Summary of Contents for XLM30RCB































Reviews: