Set a suitable room temperature; excessively low room temperature is not good for your
health and wastes electricity. Avoid frequent setting of the temperature.
During cooling, avoid direct sun. Keep curtains and blinds closed. Close doors and
windows to keep the cool air in the room.
Avoid generating heat or using of heating appliances while the air conditioner in cooling mode.
Make sure that the air flap is positioned properly: horizontal flow in cooling and downward
vertical flow for heating.
Keep the room temperature uniform by adjusting the Left/Right vertical air blades.
Position the air flap and the left/right air blades in such a manner as to prevent your
body from being exposed directly to air drafts.
During prolonged operation, ventilate the room occasionally by opening a window from time
to time.
In a power failure, the microprocessor memory is retained. When restarted, operation will be
resumed in the last mode of operation. However, if the timer was used, the unit will be turned
off by the timer only if the remote control is aimed at the unit. Otherwise the power failure will
cause the timer data to be erased from the microprocessor memory.
After turning on, allow more than 3 minutes for cooling, heating or dry operation to start.
When Dry mode is used, make sure that the room temperature is between 20
to 27
.
When used out of this range, the unit may protect itself and become inoperative.
When COOL or DRY modes are used, make sure that the room's relative humidity is below
78% If the unit is used for a prolonged periods of time in high humidity, moisture may form on
the air outlet and drip down.
Remote control signals may not be received if the indoor unit controls cover is exposed to
direct sunlight or strong light. In such a case, block the sunlight or dim the lighting.
The renote control is operative in a range of 8 meters. If you are out of range, the remote
control may have difficulties in transmitting signals.
OPERATING TIPS
17
