background image

4

ROOM
TEMPERATURE

Measures and displays room temperature. 

BUZZER                 A soft buzzer will sound from the indoor unit display to indicate that a command
                               sent by the remote control has been accepted and stored in the unit s memory.
                               This feature may be  easily cancelled by the user from the display panel.

3-MIN
DELAYED RUN

                          This compressor is protected by a three-minute delayed restart.

MEMORY               The microprocessor retains the last data entry whether or not the unit is plugged
                               in. Therefore, when the unit restarts after a power disruption or failure, it will 
                               resume operating in the same mode as before the power was disrupted.

LOCK                     Freezes the last operation setting on the remote control. When LOCK is
                               activated, the remote control will not be able to control the air-conditioner.

AUTO FLAP

The air flap (louvers) is automatically positioned for the most suitable blow-out 
angle, when COOL, HEAT, DRY or FAN modes are selected. When the air 
conditioner is turned off, the flap will close automatically for an aesthetic 
appearance.

ON UNIT 
OPERATION

The air conditoner can be turned ON for COOLING or HEATING or be turned 
OFF directly form the indoor unit display panel without the use of the remote 
control.

They are capable of capturing small particles down to 0.1 microns,
Such as atmospheric and house hold dust, coal dust, insecticide dust,
mites, pollen, pet dander, tobacco smoke particles, cooking smoke and
grease, mold fungi, bacteria, viruses and more.

ELECTROSTATIC 
FILTER
(optional)

IONIZER
(optional)

Ionizer make the air more fresh and more comfort.
Slide switch (M) to the ON position and use the remote control to activate the 
ionizer. The blue light indicator (L) on the unit will light up indicating the ionizer 
in operation. To cancel the operation set slide switch to OFF position

Important

 

Notice:

 When the air-conditioner is turned OFF or if the indoor   

fan stops operation the IONIZER stops automatically.

Auto  swing  and  fixed  direction  is  circle  and  modulators;When  press  key 
once,fan  direction   board  will  be  automatic,press   again  and  fan  direction  
board  will  be  fixed.It  retains 

when  mode 

is  switchover.

Vertical   swing 

is  controlled 

by  2 

step  motors 

A1 

&  A2.There   are 

7  kinds 

of 

modes:1) 

A1 

&  A2  at 

left  together,2)   A1  & 

A2 

at  left-middle 

together,3) 

A1 

A2 

at  middle 

together,4) 

A1 

&  A2  at 

right-middle   together,5)   A1  & 

A2 

at 

right 

together ,6) 

A1 

at  left 

and  A2  at 

right,7)  A1  & 

A2 

auto  swing.

Vertical  
swing 

key

(A1 

&  A2)

Horizontal 
swing 

key

Summary of Contents for XLM30RCB































Reviews: