14
To change between the UI versions and the HPC
versions
press the [KEYLOCK_KEY].
Fig 24
The function is disabled 10 seconds after or until any
key or combination of keys (except the
[KEYLOCK_KEY] is touched. When the message
disappears a beep sounds and the user can continue
with normal operation.
5.13 Programming
The user can change the default settings for the
slider sound and the timer increment value. After
the programming mode has been called up, Ti
(Timer) or SL (Slider) will appear in the timer display,
and 1 (enabled) will appear in the first zone display.
To call up the programming mode:
•
During the first 30 seconds after plugging in the
appliance.
•
The keypad has to be unlocked and all zones off.
•
Press at the same time, the [+TIMER], [
-
TIMER]
and the [STOP_GO_KEY].
Fig 25
A beep sounds and Ti (Timer) appears in the timer
display, and 1 (enabled) appears in the first heater
display.
To change between Timer or Slider programming
touch the [KEYLOCK_KEY].
Fig 26
To change the setting
touch any zone selection key.
Fig 27
To save the settings press at the same time
[+TIMER], [
-
TIMER] and [STOP_GO_KEY].
Fig 28
Once this is done, the new settings are saved and
there is a system reset.
To not save settings:
If during 60 seconds there is no action, changes are
not recorded and there is a system reset.
