7
Eight motorized dampers can be connected to the main control module.
Nine dampers and above (up to 16) will need the extension module.
The wiring of the AirTouch 2+ system is straightforward. A cable with central
latched plugs connects a motorized damper to the relevant output port clearly
marked on the main or extension module. Figure below shows the connection of
eight dampers to the extension module.
Configuration contd.
If there is another gateway for another AC, it will be connected to Modbus line.
Maximum four gateways can be connected for one AirTouch 2+ to control four
AC’s. Please see AC wirings for details in section 6.
Main and extension modules can be in different locations and connected via a
cable with left latched plugs on both ends. Console is connected to the ‘T’ port on
main module.
Up to two consoles can be joined in a system. One will be connected to the main
module and the other to the extension module.
Figure below shows the linking of the main module to the extension module,
AC unit, consoles, and smart phone.
Figure 2:
AirTouch 2+ with Extension module and 8 Zone ports.
Zone 9
Zone A
Zone B
Zone A
Zone B
Zone C
Zone 9
Zone G
Zone F
Zone E
Zone D
Summary of Contents for AirTouch 2
Page 1: ...airtouch net au Installer Manual...
Page 4: ...4 Compatible Brands Compatible Brands...
Page 19: ...19 Zone Setting...
Page 67: ...67...
