airpower europe GmbH, Auf der Hohl 7, D-53547 Dattenberg,
www.airpower-gmbh.com
23
Note
During automatic calibration, this
can
be aborted
by pressing the
A/M key
and switched to
normal operation.
5.3.3 Manual calibration
1. The positioner is in normal mode after powering on. Press and hold
a key A/M for more than 3 seconds to enter configuration mode.
Display:
2.
Press the button to select the parameter until the second line shows "INIM".
Display:
3.
Press the A/M button that flashes the bottom line,
switch to the parameter change
-Status.
Display:
4.
For more than
3
seconds, press the button, in the top line "
STRT"
,
in the lower line
"ZERO" is displayed.
Display:
5.
Press or to select the starting point.
Display:
6.
Press A/M to confirm the bottom line shows "SPAN"
Display:
7.
Press or to select the endpoint.
Display:
8.
Confirm by pressing the A/M key to continue. The entire procedure from "STEP1" to "STEP5" is passed through. The
current step is shown in the bottom row.
Display:
9.
After calibration, the parameter values are displayed in the upper row, in the lower line the
corresponding calibration
parameter
is
displayed.
Display:
10.
Press the A/M
key
to return to normal operation.
CONFI
P1
INIM
No
02
INIM
STR
02
INIM
STR
02
ZERO
{}
ZERO
{}
Span
{}
Span
83.
{}
STEP1
50.
{}
STEP2
50.
{}
STEP3
50.
{}
STEP4
50.
{}
STEP5
50.
{}
DBUP
0.
A
-
A
Pup
0.
A
Pdw
-
A
IMUP
15
A
IMD
-15
A
SSUP
1.
A
SSDW
-
A
