Airobotics Optimus-1 EX-FTS, Mast Assembly Procedure

Page: 22 / 33

OPT1-M-104 Rev.01 Optimus-1 EX - FTS Mast Assembly Procedure
Page 22 of 33
Figure 16 Cable connections in the FTS mast unit back panel
Figure 17 The FTS mast unit back panel
6. Connect the POE+ port from the FTS unit to the DC panel external connection marked as
port 2J10 using the EO05277 CAT7 15m cable (see
Figure 16
).
7. Open the mast output interfaces cover panel (unscrew the 5 Philips head screws).
Ground
From Cellular Antenna From LoRa Antenna
POE +
From DC
Panel 2J10
From Cellular Antenna
From LoRa Antenna
Ground
POE +
From DC
Panel 2J10