OPT1-M-104 Rev.01
Optimus-1 EX - FTS Mast Assembly Procedure
Page 2 of 33
This document has been prepared for the exclusive use of Airobotics Ltd. (“Airobotics”) under the
direction and authority of Airobotics and shall, at all times, remain the property of Airobotics. The
holder hereof acknowledges and agrees that this document contains or may contain trade secrets,
copyrighted material and commercial and proprietary information, privileged and confidential, and the
holder hereof further agrees that this document may not be reproduced, distributed or copied, in whole
or in part, without the express prior written consent of Airobotics. In the event this manual is sold or
distributed to any other party, no warranty or guarantee, expressed or implied, is made as to the
accuracy, sufficiency or suitability of the materials contained herein or of any revision, supplement or
bulletin hereto, and Airobotics shall not be responsible for providing revisions for this manual to any
third-party to whom this document is sold or distributed to. It is understood and agreed to by such
other party that it shall release, indemnify, and hold Airobotics, its officers, employees and agents
harmless against any and all claims or actions of whatever nature which may arise or claim to arise
from the use hereof.
