OPT1-M-104 Rev.01
Optimus-1 EX - FTS Mast Assembly Procedure
Page 12 of 33
3.4
Mounting the Antennas on the Mast
To mount the antennas on the upper mast, do the following:
1.
Connect the Main antenna bracket to the V-
bracket that’s located below the
camera/whether station V-bracket (see
).
Figure 4 Connecting the V-bracket sub-assemblies to the mast
NOTE:
Before proceeding to the next stage of the FTS assembly procedure, raise the second section
of the mast by a height of 80 cm (just below the point where it reaches its locking position).
