Airo X RT Series, Use And Maintenance Manual

Page: 29 / 118

Use and Maintenance Manual - X_RT Series Page 29
5. USE INSTRUCTIONS
Before using the machine read this chapter thoroughly.
WARNING!
Follow exclusively the instructions given in the next paragraphs and the safety rules described both
hereafter and in the previous paragraphs. Read the next paragraphs carefully in order to properly
understand the on/off procedures as well as all operations and their correct use.
5.1 Platform control panel
The control panel is located on the platform. The control panel is fixed to the front guard rail and is used to:
Turn the machine on/off.
Move the platform during ordinary working procedures.
Display some operation parameters (alarms, deadman’s working, etc…).
Fig.5
A) Drive and steering proportional joystick control
A1) Left steering control switch
A2) Right steering control switch
B) Lifting/lowering control proportional lever
F) Drive speed selector
G) Diesel engine start button
H) Diesel/electric drive power selector (optional)
I) Single-phase/three-phase electric pump start/stop button (optional)
L) Differential lock button (series/parallel connection drive motors)
M Manual horn
N) Emergency STOP button
O) Enabled control panel warning light
P) Sliding platform position warning light (only for machines with sliding platform)
Q) Flat battery warning light – Electric models
R) Drive enable warning light
S) Danger warning light (unsteady position and faults indicator)
T) Lifting enable warning light
U) Overload alarm warning light
V) Diesel engine fault / low fuel level warning light – Thermic models
ZA) Manual levelling outriggers control switches (optional)
ZB) Levelling outriggers position warning lights (optional)
ZC) Automatic levelling control switch (optional)
A
A1
A2
B
F
G H
I
P
Q
R
T U
V
A
B
C
D
S
E
"