Airo X RT Series, Use And Maintenance Manual

Page: 75 / 118

Use and Maintenance Manual - X_RT Series Page 75
7.3.15 Dead-man button efficiency check
The platform dead-man button is for enabling the operation controls of the machine from the platform control station.
Check operation at least once a year.
WARNING!
IN CASE OF NO OPERATION, CONTACT THE AFTER-SALES SERVICE
To check the dead-man BUTTON:
Move the drive joystick forward and backward in sequence, WITHOUT PRESSING THE DEAD-MAN BUTTON
Check that the machine does not perform any movement
Press dead-man button, release it and wait more than 5 seconds
move the joystick forward and backward in sequence
Check that the machine does not perform any movement
If the device works properly, no machine manoeuvre is possible from the platform control panel unless you press the dead-man
button beforehand. If this is pressed for more than 5 seconds and no operation is performed, all movements are disabled; to
operate the machine again, release the dead-man button and press it again.
The condition of the switch is indicated by the green led in the platform:
green led lit up steady control panel enabled
green led lit up flashing control panel disabled