manualshive.com logo in svg

AirMagnet PRG-Laptop 7.0, Reference Manual, Page: 23 / 210

Share
Download
AirMagnet PRG-Laptop 7.0 Reference Manual Download Page 23

AirMagnet Laptop Wireless LAN Policy Reference Guide

Chapter 1: Configuration Vulnerabilities

15

AirMagnet 

Mobile 

detects client stations that are using SSIDs 

configured for use in the Hotspot environment. AirMagnet 

Mobile 

suggests that the administrator use the AirMagnet Find tool to locate 

the clients and take appropriate steps to avoid probing using the 

Hotspot SSID.

Figure 1-12: Locating a device using AirMagnet Mobile FIND tool

Potential Pre-802.11n device detected

In January 2004, the IEEE announced that it had formed a new 802.11 

Task Group (TGn) to develop a new amendment for the existing 

standard for wireless local-area networks. It was expected to provide 

transmission speeds greater than 100 Mb/s, but this proposal has 

come a long way, with even higher speeds being possible at this time: 

it may even reach the theoretical value of 540 Mb/s. It is also 

expected to provide a larger range than the 802.11a/g standards and 

will operate in the 2.4 Ghz band shared with 802.11b/g devices.
Initially, there were two proposals to the standard:

• WWiSE (World-Wide Spectrum Efficiency), backed by 

companies such Airgo, Broadcom, Conexant, and Texas 

Instruments, and

Laptop Wireless LAN Policy Reference Guide.book  Page 15  Thursday, January 25, 2007  5:36 PM

Summary of Contents for PRG-Laptop 7.0



















































































































































































































Reviews:

No comments