manualshive.com logo in svg

AirMagnet PRG-Laptop 7.0, Reference Manual, Page: 117 / 210

Share
Download
AirMagnet PRG-Laptop 7.0 Reference Manual Download Page 117

AirMagnet Laptop Wireless LAN Policy Reference Guide

Chapter 5: Authentication and Encryption

109

TKIP (Temporal Key Integrity Protocol) encryption mechanism, 

which is now supported by most enterprise-level wireless 

equipment.  TKIP-enabled devices are not subject to any such WEP 

key attacks.

Device Using Open Authentication

802.11 Open Authentication (as opposed to Shared-key 
authentication) is widely used today in conjunction with a higher-

level authentication protocol such as 802.1x to secure a WLAN.  In 

some deployments, Shared-key Authentication where a static WEP 

key is used to challenge client stations attempting to associate with 

the AP is used instead of Open Authentication.   Open 

Authentication, on the other hand, accepts associations from any 

client and there is no verification of the client's identity. Shared-key 

authentication appears to be more secure but actually has been 

proven to be vulnerable to WEP key cracking by wireless intruders 

because the challenge text and response are both clear and 

unencrypted.  This means that the information is easily intercepted 

and interpreted by anyone with the appropriate software.
The recommended practice is to use 802.11 Open Authentication with 

some higher-level authentication mechanisms, such as the 802.1x/

EAP framework or VPN. In case your deployment chooses to use 

Shared-key Authentication or something other than Open 

Authentication, you can enable this alarm to have AirMagnet Mobile 

alert you whenever it detects any device that violates your 

deployment policy of not using Open Authentication.

Device Using Shared Key Authentication

The IEEE 802.11 standard designed the Shared-key Authentication 

protocol to work with static 

WEP

 key encryption to lock out 

unauthorized WLAN devices from associating with an AP or ad-hoc 

station. It is a simple 4-packet exchange challenge/response protocol 

as illustrated below:

Laptop Wireless LAN Policy Reference Guide.book  Page 109  Thursday, January 25, 2007  5:36 PM

Summary of Contents for PRG-Laptop 7.0



















































































































































































































Reviews:

No comments