manualshive.com logo in svg

AirMagnet PRG-Laptop 7.0, Reference Manual, Page: 130 / 210

Share
Download
AirMagnet PRG-Laptop 7.0 Reference Manual Download Page 130

122

Chapter 5: Authentication and Encryption

AirMagnet Laptop Wireless LAN Policy Reference Guide

Device Unproetected by EAP-FAST

It is well publicized that WLAN devices using static WEP key for 

encryption are vulnerable to the WEP key cracking attack ( see the 

paper 

Weaknesses in the Key Scheduling Algorithm of RC4-I

 by 

Scott Fluhrer, Itsik Mantin and Adi Shamir

). 

Cisco Systems introduced LEAP (Lightweight Extensible 

Authentication Protocol) to leverage the existing 802.1x framework to 

avoid such WEP key attacks. The Cisco LEAP solution provides 

mutual authentication, dynamic per session and per user keys and 

configurable WEP session key time out. The LEAP solution was 

considered to be not only a stable security solution but also 

considered to be easy to configure.
Joshua Wright, a network engineer at Johnson & Wales University in 

Providence, Rhode Island has written a hacking tool that 

compromises wireless LAN networks running LEAP by using off-

line dictionary attacks to break LEAP passwords The tool after 

detecting WLAN networks that use LEAP, de-authenticates the users 

forcing them to reconnect and provide their user name and password 

credentials. The hacker can capture packets of legitimate users trying 

to re-access the network. After that the attacker can analyze the traffic 

off-line and guess the password by testing values from a dictionary.
The main features of the ASLEAP tool include:

• Reading live from any wireless interface in RFMON mode 
with libpcap.

• Monitoring a single channel, or perform channel hopping to 
look for target networks running LEAP.

• Actively deauthenticate users on LEAP networks, forcing 
them to reauthenticate.  This makes the capture of LEAP pass-
words very fast.

• Only de-authenticating users who have not already been 
seen, doesn't waste time on users who are not running LEAP.

• Reading from stored libpcap files.

Laptop Wireless LAN Policy Reference Guide.book  Page 122  Thursday, January 25, 2007  5:36 PM

Summary of Contents for PRG-Laptop 7.0



















































































































































































































Reviews:

No comments