AirLive IP-200PHD-24 User Manual Download Page 36

Page: 36 / 97

4. Monitor the Image Section

AirLive IP-200PHD-24/IP-200PHD-24B

User’s Manual

4.2.5 UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture

that provides compatibility among networking equipment, software, and

peripherals. This device is an UPnP enabled Network Camera. If your

operating system is UPnP enabled, the device will automatically be detected

and a new icon will be added to “My Network Places.” If you do not want to use

the UPnP functionality, it can be disabled.

In addition, this device also provides UPnP IGD function for NAT traversal

easily. Use NAT traversal when your device is located on an intranet (LAN)

and you wish to make it available from the other (WAN) side of a NAT router.

With NAT traversal properly configured, all HTTP traffic to an external HTTP

port in the NAT router will be forwarded to the device.

Summary of Contents for IP-200PHD-24


































































































Search results

Summary of Contents for IP-200PHD-24

Reviews:

Related manuals for IP-200PHD-24

Brands by name

Popular brands

AirLive IP-200PHD-24, User Manual

Search results

Summary of Contents for IP-200PHD-24

Reviews:

Related manuals for IP-200PHD-24

Brands by name

Popular brands