AirLive IP-2000VPN User’s Manual
43
Data – Firewall Rules Screen
Rule List
View Rules
for …
Select the desired option; the screen will update and list any current rules. If you
have not defined any rules, the list will be empty.
Data
For each rule, the following data is shown:
•
Name
- The name you assigned to the rule.
•
Source
- The traffic covered by this rule, defined by the source IP address. If the
IP address is followed by ... this indicates there is range of IP addresses, rather
than a single address.
•
Destination
- The traffic covered by this rule, defined by destination IP address.
If the IP address is followed by ... this indicates there is range of IP addresses,
rather than a single address.
•
Action
- Action will be "Forward" or "Block"
Add
To add a new rule, click the "Add" button, and complete the resulting screen. See the
following section for more details.
Edit
To Edit or modify an existing rule, select it and click the "Edit" button.
Move
There are 2 ways to change the order of rules
•
Use the up and down indicators on the right to move the selected rule. You must
confirm your changes by clicking "OK". If you change your mind before clicking
"OK", click "Cancel" to reverse your changes.
•
Click "Move" to directly specify a new location for the selected rule.
Delete
To delete an existing rule, select it and click the "Delete" button.
View Log
Clicking the "View Log" button will open a new window and display the Firewall log.
System Rules
Clicking the "System Rules" button will open a new window and display the default
firewall rules currently applied by the system. These rules cannot be edited, but any
rules you create will take precedence over the default rules.
