5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button
Obtain an IP Address automatically
. This is the default Windows
setting, and it is recommended to use it. By default, the IP-2000VPN will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-2000VPN.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following changes.
•
In
the
Default Gateway
field, enter the IP-2000VPN’s IP address and click
OK
. Your LAN
administrator can advise you of the IP Address they assigned to the IP-2000VPN.
•
If
the
DNS Server
fields are empty, select
Use the following DNS server addresses
, and enter the
DNS address or addresses provided by your ISP, then click
OK.
Macintosh Clients
From your Macintosh, you can access the Internet via the IP-2000VPN. The procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select
Ethernet
from the
Connect via
pop-up menu.
3. Select
Using DHCP Server
from the
Configure
pop-up menu. The DHCP Client ID field can be left
blank.
AirLive IP-2000VPN User’s Manual
167
