INSTALLATION INSTRUCTIONS AF200-007 - REV E
DATE 2/26/2015
Airfilm Camera Systems
Page
17
of
31
6245 Aerodrome Way Hangar No. 2
Georgetown, Ca 95634
FINAL INSTALLATION INSTRUCTIONS:
1. CHECK ENTIRE MOUNT FOR SECURITY AND PROPER BOLT TORQUE
SETTINGS.
2. CALCULATE WEIGHT AND BALANCE
3. INSTALL
APPROPRIATE
PLACARDS IN COCKPIT
V
NE
= Reduce the published V
NE
by 40 KIAS
for aircraft with a 155 KIAS V
NE
V
NE
= Reduce the published V
NE
by 35 KIAS
for aircraft with a 150 KIAS V
NE
with a camera and counter weight installed
The pitot heat must remain
OFF
and/or the circuit breaker pulled
With the auxiliary pitot tube installed.
4. MAKE LOG BOOK ENTRIES AS REQUIRED BY FAR’S
5. RETURN AIRCRAFT TO SERVICE
REMOVAL INSTRUCTIONS: AF200 MOUNT
.
To remove AF200-2 mount from aircraft:
Follow directions in reverse order and replace all original hardware / fixtures that were
removed for installation of AF200-2 mount. If Any
Remove any AF200-2 mount placards from cockpit
Calculate weight and balance
Make appropriate log book entry
Return Aircraft to service
