INSTALLATION INSTRUCTIONS AF200-007 - REV E
DATE 2/26/2015
Airfilm Camera Systems
Page
21
of
31
6245 Aerodrome Way Hangar No. 2
Georgetown, Ca 95634
APPENDIX D - METHOD OF ADDING ADDITIONAL
SENSOR /CAMERA / PAYLOADS
1. Overview
This Appendix provides the requirements necessary to qualify sensor / camera / light
payloads – IF NEEDED.
It may also be used as a check list for previously approved sensor /cameras / light
payloads if desired.
The STC flight testing was conducted and the STC approved with the largest and heaviest
payload expected for use with this mount. The specific sensor/cameras/light not listed in
the installation manual of equal or lesser than the limit case are accepted with this follow-
on test plan.
2. Sensor/ Camera/ payload
Make & Model ________________________________
3. Test Team
Pilot/s
_________________________________ ________________________________
Print Name
Mechanic and/or Engineer and/or Camera Operator
_______________________________ _____________________________
Print Name
4. Test Aircraft Configuration and Location
Aircraft Model, Registration & Serial Number
________________ _______________________ _______________________
Model
Registration Number
Serial Number
Test Configurations
Empty weight with appropriate fuel and camera system installed
Takeoff Gross weight with crew
Configuration Gross
Weight
Longitudinal CG
Lateral CG
Empty
Wt
Takeoff
Wt
