INSTALLATION INSTRUCTIONS AF200-007 - REV E
DATE 2/26/2015
Airfilm Camera Systems
Page
8
of
31
6245 Aerodrome Way Hangar No. 2
Georgetown, Ca 95634
8.1) Adjust fork fitting to level sensor yoke if required. Ensure nut is tight against lock
washer.
9) Attach supplied hose to aircraft pitot tube and Pitot tube extension, use supplied aero
seal (QS100-M8W) hose clamp. Cut hose to length as required. Tighten hose clamp
around hose at both ends to secure. Check that the hose clamp is secure and hose is well
retained
10) CHECK ENTIRE MOUNT FOR PROPER BOLT TORQUE SETTINGS,
SECURITY.
11) FOR CAMERA INSTALLATION SEE APPENDIX A & D
