- 9 -
Airaya
– Fast and affordable outdoor wireless bridges
Each
AI108-4958-Kit
comes in one carton and contains the following
components:
Two AI108-4958-N units with N-type
female connectors
Two 23 dBi antennas with N-type
female connectors & mounting
brackets
Two 25 foot LMR-400 cables with N-
type male connectors
This installation manual
Please register your product online at:
www.airaya.com
in the support/
product registration section of our web site.
Note:
Free technical support
is only available to registered users of AIRAYA equipment.
Please inform your dealer if there are any incorrect, missing, or damaged
parts. If possible, retain the carton and original packing materials for
repacking purposes in case you need to return the bridge for repair.
Hardware Description
Ethernet Compatibility
Each AIRAYA WirelessGRID wireless bridge can be attached directly to a
10BASE-T/100BASE-TX (twisted-pair) Ethernet LAN segment. These
segments must conform to the IEEE 802.3 specification.
Radio Characteristics
The WirelessGRID bridge utilizes a radio modulation technique known as
Orthogonal Frequency Division Multiplexing (OFDM) and is capable of
operating in the 4.9 GHz to 5.850 GHz frequency range with 5, 10, 20, or
40 MHz wide channels. Data is transmitted over a half-duplex radio
channel at speeds of up to 108 Mbps.
Antenna Type
The AI108-4958-kit comes with 23 dBi panel antennas that operate in the
5.15-5.850 GHz frequency range.
For international and military markets, the AI108-4958-N can be used with
external antennas options and radio output power between 6 and 21 dBm.
Please contact AIRAYA for additional antenna options. Local regulations apply.
