manualshive.com logo in svg

Airaya AI108-4958-1, Manual And Installation Manual

Share
Download
Airaya AI108-4958-1 Manual And Installation Manual Download Page 35

 

- 35 - 

Airaya

 – Fast and affordable outdoor wireless bridges

 

 

Security Server (RADIUS) Settings  

This screen is used to view, add, and update a bridge’s security server 
settings.

 

Note: This feature is currently NOT implemented.

 

 

 
 
 

 
 
 
 
 
 

 
 
 
 
 

 
 
 
 
 

 
 
 
 
 

 

This screen includes the following settings: 
 

Domain Name Server IP Address

 

–

 Specifies the IP address of the 

domain name server. 
 

Domain Name Server

 

–

 Specifies the domain name server. 

 

RADIUS Server

 

–

 Specifies the IP address of the RADIUS server. 

 

RADIUS Port

 

–

 Specifies the port of the RADIUS server. 

 

RADIUS Secret

 

–

 Specifies the password for the RADIUS server. 

 

RADIUS Key Source

 

–

 Specifies the location of RADIUS keys. 

 

5GHz Key Source

 

–

 Check “Local” to specify that the keys are located in 

the bridge; check “Remote” to indicate that the RADIUS keys are located 
on a external RADIUS server. 

 

Summary of Contents for AI108-4958-1





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands