❯
If you use the right-angle technique, make sure
to use a fitting right-angle holder. The right-
angle holder must not damage the hygienic
protective cover.
❯
Set the exposure values on the X-ray unit (see
"14 Recommended exposure times").
❯
Place the sensor with the right-angle holder in
the patient's mouth.
Make sure that the active (white) side of the
sensor faces the X-ray unit when you do this.
❯
Trigger the X-ray image.
The image is automatically transferred to the
imaging software. No further X-ray image can
be taken during data transmission.
10 Cleaning and disinfection
When cleaning and disinfecting the unit and its
accessories, comply with national directives,
standards and specifications for medical prod-
ucts as well as the specific specifications for
dental practices or clinics.
NOTICE
The use of unsuitable agents and
methods can damage the unit and
accessories
❯
Only use the disinfection and cleaning
agents specified or approved by Air
Techniques and the EPA.
❯
Comply with the operating instructions
of the disinfectants and cleaning
agents.
Wear hand protection.
Usage
2121100020L29 2101V007
25
EN-
US
