VELTRON DPT-
plus
Air Monitor Corporation
116-010-91.P65 (09/18/09)
VELTRON DPT-
plus
- IO&M Manual
37
5.13 –DISPLAY CONFIGURATION
User can select display parameter, for lines 2 and 3. Also, each line can have a level of filtering, 0 through 4 (4 is
maximum) selected by User.
SECTION 5 – OPERATION
- K-Factor Configuration
Display Config.
- Analog Output Configuration
- LINE 1
- LINE 2
- LINE 3
- Return to MAIN MENU
LINE 2
-PARAMETER
-DIFF. PRES UNITS 1
-SET CUSTOMTEXT2
-FILTER 3
-EXIT
LINE 1
- FILTER
- EXIT
LINE 2
Parameter
DIFF. PRESSURE
LINE 2
FILTER
0 (None)
see Parameter
List for selection
for lines 2 & 3
0 (None) to
4 (Maximum)
Default selection shown.
Available selections:
User Setup Main Menu
Display Configiguration
LINE 2
EXIT
Return to MAIN
MENU
LINE 1
FILTER
0 (None)
0 (None) to
4 (Maximum)
LINE 1
EXIT
LINE 3
same as LINE 2
3 Not avail if Parameter is ALARM
SETPOINT or CUSTOM TEXT.
2 Available only if Parameter is
CUSTOM TEXT.
1 Available only if Parameter is
DIFF. PRESSURE.
LINE 2
DIFF. PRES. UNITS
in.WC
in.WC, in.Hg,
psig, Pa, kPa, bars,
mbars, mm WC,
mm Hg, kg/m2
LINE 2
SET CUSTOM TEXT
see ASCII
Character Chart for
selection
