6. Command Line Interface
AirLive WHA-5500CPE User’s Manual
92
Command> set age out time 5
Radio1 age out time: 5
set transmit power <range: 0-24>
Purpose:
To set the TX output power value of the radio
Example:
Command> set transmit power 20
Radio1 transmit power: 20
set data rate <best | 6~54>
Purpose:
To set the date rate. For example, 54mbps, 36mbps….etc
Example:
Command> set data rate 54
Radio1 data rate: 54
set acktimeout <11A>
Purpose:
To set the ACK timeout value
Example:
Command> set acktimeout 25
AckTimeOut for radio1: 11A=25
set vlan for ssid <enable | disable>
Purpose:
Enable VLAN function
Example:
Command> set vlan for ssid enable
set diffserv marking <enable | disable>
Purpose:
To enable diffserv marking function in multiple SSID & VLAN
configuration.
Example:
Command> set diffserv marking enable
set security <ssid> none
Purpose:
To remove security policy from a SSID
Example:
Command> set security airlive none
Set Radio1 no security !
