4. Web Management-Wireless and WAN Settings
AirLive WHA-5500CPE User’s Manual
34
•
SuperA:
Super-A add Bursting, Compression, and Fast Frames to increase the
speed over 11a mode. If you live in countries that prohibit the channel binding
technology (i.e. Europe), you should choose “Super-A” If you need more speed than
11a mode. However, this mode is not as stable as 11a mode.
•
Super-A with Static Turbo
: Turbo mode uses channel binding technology to
increase the speed further over Super-A mode. This mode might not be allowed in
countries that prohibit channel binding (i.e. some EU countries). This mode will
always turn on the turbo mode in all conditions
•
Super-A with Dynamic Turbo
: Dynamic Turbo mode will be turn on only when
adjacent channel is not used. It is also know as intelligent turbo mode. This mode
might not be allowed in countries that prohibit channel binding (i.e. some EU
countries). In addition, this mode does not work in WDS Bridge mode
4.2.7 SuperA Option
Operation Mode -> Setup -> SuperA Option
When you select Radio Mode with “Super-A”, the SuperA Options will be available.
Bursting
: Allow more data frame to be sent over given period of time by overhead
reduction.
Compression
: Increasing throughput by compressing data frame in real time
Fast Frame
: Utilizing frame aggregation and removing interframe pauses to increase
the throughput.
It is recommended to select all 3 options except for compatibility reasons with remote AP.
4.2.8 Channel
Operation Mode -> Setup -> Channel
The channel is the frequency range used by radio. In 802.11a standard, each channel
occupies 20MHz width. For 2 wireless devices to connect, they must use the same
channel. The number of available legal channels might be different between countries.
For example, Channel 149 to 161 are available only to United States and a few other
countries. If you are living outside EU, please change the country from the “
Regulatory
Domain
” option in this page. Below is the table list of channels and frequency.
If you select “11a” or “Super-A” mode, you can still combined
them with Turbo mode when you select “40MHz” Channel Width.
