7
MN-594
SureSet
9. Attach a ground terminal to the small white wire coming out of the back of the ECU/Display
Connector (Fig. 8).
ATTACHING THE AIR LINES
1. Insert two 1/8” x 1/4” air
fi
ttings into the two open ports at the top of the manifold (
fi
g.
9).
2. Insert the 1/4” x 1/4” air
fi
tting into the open port on the side of the manifold (
fi
g. 9).
3. Using a standard tube cutter, a razor blade, or a very sharp knife, squarely cut a piece
of air line to go between each of the air springs and the supplied tees.
4. Cut another length of air line to go between the other side of the tee and one of the two
ports at the top of the manifold (
fi
g. 9).
5. Insert a length of air line with the existing in
fl
ation valves to the other port of the tee.
fi g. 9
L
R
Air springs are shown for
reference only. They are
not included in the kit.
Existing
in
fl
ation valve
Existing
in
fl
ation valve
Leader hose
Compressor
Manifold
ECU/display
+
–
+
–
Ground
ECU/display connector
fi g. 8