background image

10

MN-594

SureSet

Air Lift Company warrants its products for the time periods listed on the next page, to the 
original retail purchaser against manufacturing defects used on catalog listed applications 
on cars, vans, light trucks and motorhomes under normal operating conditions for as 
long as Air Lift manufactures the product. The warranty does not apply to products that 
have been improperly applied, installed, used in racing applications or not maintained in 
accordance with installation instructions furnished with all Air Lift products. The consumer 
will be responsible for removing (labor charges) the defective product from the vehicle and 
returning it, transportation costs prepaid to the dealer from which it was purchased or to Air 
Lift Company for veri

fi

 cation. 

Air Lift will repair or replace, at its option, defective products or components. A $10.00 
minimum shipping and handling charge will apply to all warranty claims. Before returning 
any defective product, you must call Air Lift (800) 248-0892 U.S. and Canada for a Returned 
Materials Authorization (RMA) number. Returns to Air Lift can be sent to: Air Lift Company 
• 2727 Snow Road • Lansing, MI • 48917. 

Product failures resulting from abnormal use or misuse are excluded from this warranty. The 
loss of use of the product, loss of time, inconvenience, commercial loss or consequential 
damages is not covered. The consumer is responsible for installation/reinstallation (labor 
charges) of the product. Air Lift Company reserves the right to change the design of any 
product without assuming any obligation to modify any product previously manufactured. 

This warranty gives you speci

fi

 c legal rights and you may also have other rights that may vary 

from state-to-state. Some states do not allow limitations on how long an implied warranty 
lasts or allow the exclusion or limitation of incidental or consequential damages. The above 
limitation or exclusion may not apply to you. There are no warranties, expressed or implied 
including any implied warranties of merchantability and 

fi

 tness, which extend beyond this 

warranty period. There are no warranties that extend beyond the description on the face 
hereof. Seller disclaims the implied warranty of merchantability. 

(Dated proof of purchase 

required.)

Warranty and Returns Policy

Problem

Cause

Solution

System doesn’t work/no 
display.

Blown fuse or poor 
electrical connection.

Replace fuse/repair 
connection.

Compressor doesn’t run.

Blown fuse, bad ground or 
poor electrical connection.

Replace the fuse, 
check ground or check 
compressor connection.

Solenoid doesn’t work.

Blown fuse or poor 
electrical connection.

Replace the fuse or check 
the solenoid connector.

Compressor runs all the 
time.

Leak in the system or 
compressor relay is bad.

Locate the leak and replace 
the relay.

Display shows “sensor 
fault.”

Bad ground or bad sensor.

Check ground or replace 
manifold.

Troubleshooting Guide

Summary of Contents for SureSET 25004

















Reviews: