10
MN-944
LoadLifter 5000 Ultimate
5 . Flip the air spring assemblies upside down and set a roll plate (E) over the air spring
(same as in step one) .
6 .
Position the air spring assemblies so that the fittings are outboard and away from each
other (fig. 19).
The finished assemblies will be left and right-hand specific, and the fittings that are on the
top of the air springs should be facing the outside (tire side) of the vehicle once into position.
7 . Set the left-hand lower bracket (C1) onto the left side assembly (your left-hand facing
both assemblies) and attach with two 3/8” flat head screws (G). Torque to no more than
20 ft-lbs. (fig. 19). Attach the right-hand lower bracket (C2) onto the right-side assembly
(your right-hand facing both assemblies). Attach with two 3/8” flat head screws (G).
Torque to no more than 20 ft-lbs. (fig. 20).
NOTE
fig. 17
fig. 18
fig. 19
B
L
L
H I
J
E
E
Summary of Contents for 88365
Page 2: ......
