7
MN-944
LoadLifter 5000 Ultimate
9 . Only tighten the bolt to where it can still slide in the slot .
10 .
Set the frame bracket (with the socket head bolt in it), on the frame, with the flange
pointing up . Insert the socket head bolt into the existing hole in the frame that was under
the stock jounce bumper (fig. 10).
11 .
The bracket should sit flush to the bottom of the frame. If there is any leftover weld
holding the bracket off the frame, remove and grind down so the bracket is flush.
12 .
With the socket head bolt in the hole, push the flange against the side of the frame
(fig. 11) and mark the existing hole under the frame with a paint marker (fig. 12).
fig. 9
fig. 10
fig. 11
O
M
Summary of Contents for 88365
Page 2: ......
