12
MN-944
LoadLifter 5000 Ultimate
4 . Insert another 3/8” carriage bolt (L) through the remaining hole in the front side of the
bracket (fig. 24).
5 . It will be necessary to use a socket with an extension to reach the inside threads on the
carriage bolt previously set into position (fig. 25). It may be helpful to pull the carriage
bolt out slightly so that it can be angled enough to get started on the thread .
fig. 23
fig. 24
fig. 25
Use the slot
in the lower
control arm
mount for the
extension to fit
through while
threading the
nut on the
bolt .
L
N
L
Summary of Contents for 88365
Page 2: ......
