background image

24

MN-944

LoadLifter 5000 Ultimate

Air Lift 1000™  . . . . . . . . . . . . . . . . . . . .Lifetime Limited
RideControl™  . . . . . . . . . . . . . . . . . . . .Lifetime Limited
LoadLifter 5000™*  . . . . . . . . . . . . .Lifetime Limited

LoadLifter 5000™ Ultimate  . . .Lifetime Limited 

SlamAir™  . . . . . . . . . . . . . . . . . . . . . . . . . . .Lifetime Limited
AirCell™  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Lifetime Limited
Air Lift Performance™** . . . . . . .1 Year Limited
LoadController/Single™  . . . . . .2 Year Limited

LoadController/Dual™  . . . . . . . . .2 Year Limited
Load Controller™ (I)  . . . . . . . . . . . . .2 Year Limited
Load Controller™ (II)  . . . . . . . . . . . .2 Year Limited
SmartAir™  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Year Limited
Wireless AIR™  . . . . . . . . . . . . . . . . . . . . . .2 Year Limited
WirelessONE™  . . . . . . . . . . . . . . . . . . . . .2 Year Limited 
Other Accessories  . . . . . . . . . . . . . . . .2 Year Limited

*formerly SuperDuty

**formerly LifeSTYLE & Performance, EasyStreet

Air Lift Company warrants its products, for the time periods listed below, to the original 
retail purchaser against manufacturing defects when used on catalog-listed applications on 
cars, vans, light trucks and motorhomes under normal operating conditions for as long as 
Air Lift manufactures the product . The warranty does not apply to products that have been 
improperly applied, improperly installed, used in racing or off-road applications, used for 
commercial purposes, or which have not been maintained in accordance with installation 
instructions furnished with all products . The consumer will be responsible for removing 
(labor charges) the defective product from the vehicle and returning it, transportation costs 

prepaid, to the dealer from which it was purchased or to Air Lift Company for verification. 

Air Lift will repair or replace, at its option, defective products or components . A minimum 
$10 .00 shipping and handling charge will apply to all warranty claims . Before returning 
any defective product, you must call Air Lift at (800) 248-0892 in the U .S . and Canada 
(elsewhere, (517) 322-2144) for a Returned Materials Authorization (RMA) number . 
Returns to Air Lift can be sent to: Air Lift Company • 2727 Snow Road • Lansing, MI • 
48917 . 

Product failures resulting from abnormal use or misuse are excluded from this warranty . The 
loss of use of the product, loss of time, inconvenience, commercial loss or consequential 
damages is not covered . The consumer is responsible for installation/reinstallation (labor 
charges) of the product . Air Lift Company reserves the right to change the design of any 
product without assuming any obligation to modify any product previously manufactured . 

This warranty gives you specific legal rights and you may also have other rights that vary 
from state-to-state . Some states do not allow limitations on how long an implied warranty 
lasts or allow the exclusion or limitation of incidental or consequential damages . The above 
limitation or exclusion may not apply to you . There are no warranties, expressed or implied 

including any implied warranties of merchantability and fitness, which extend beyond this 

warranty period . There are no warranties that extend beyond the description on the face 
hereof . Seller disclaims the implied warranty of merchantability . (Dated proof of purchase 
required .)

Warranty and Returns Policy

Summary of Contents for 88365





























Reviews: