Installation and Maintenance Manual
5
NOTE TO INSTALLER
Only trained and qualified personnel should install, repair or service air conditioning equipment.
Untrained supervised operatives can perform basic maintenance functions such as cleaning or
replacing filters. Service personnel must perform all other operations.
Installing and servicing air conditioning equipment can be hazardous due to electrical and
mechanical components.
When working on air conditioning equipment, observe precautions in all literature, tags and labels
attached to or shipped with unit. Follow all safety codes and guidelines. Wear safety goggles, work
gloves and any protective clothing.
All work must comply with relevant Australian Standard wiring rules and local authority codes.
Installers must ensure that all statutory regulations and by-laws have been addressed, and that all
relevant codes regarding the handling and recovery of refrigerants have been observed.
Installers must ensure that the structures built to take the units have been suitably constructed for
the purpose, all safety precautions have been applied prior to installation, and all preparation work
has been constructed and suitably sized for its purpose.
Inspection and Unpacking
The unit should be inspected upon delivery for possible external damage incurred during transport.
If damage is evident it should be noted on the freight docket and the Air Change sales office
contacted. A claim should be lodged with shipping company within three (3) days if shipment is
damaged or incomplete.
If major damage is apparent, do not lift unit on to site without prior approval from Air Change. All
units are tested and inspected prior to packing and leave Air Change premises in perfect condition.
Check unit rating plate to ensure the correct unit matches the job specifications.
Unit Handling
Do not remove the skids, or any protective crating or packaging, until the unit is at the point of
installation. When removing packaging or crating, be careful not to damage, scratch, or dent the
unit.
After the removal of packaging or crating, all removable access panels should be opened to inspect
for unit internal damage.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz