Air Change PCU Installation And Maintenance Manual Download Page 31 | Manualshive

Page: 31 / 35

Air Change PCU Installation And Maintenance Manual Download Page 31

Installation and Maintenance Manual

31

11.

WARRANTY INFORMATION, TERMS &
CONDITIONS

Failure to carry out regular maintenance with a licensed and reputable refrigeration company may
render warranty claims invalid if faults have been caused by lack of Maintenance. Air Change may
request to see the maintenance schedule carried out.

Management will need to keep records provided by service companies, which will detail the service
done to each unit. This record is a summary of your service documentation for easy reference for
management in case of a warranty claim.

Your equipment is a major investment and will last for many years if properly maintained and serviced.

Air Change Australia Pty Ltd will only accept a completed warranty card (issued in each manual; see
page 32) or a copy of the original invoice complete with matching serial numbers as proof of purchase.
This information must be verified before the authorisation of any warranty claims. We also require
details of servicing with all warranty claims.

Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz

«
...
29
30
31
32
33
...
»

Summary of Contents for PCU




































Reviews:

No comments