-Page 19 -
- Page 20 -
Installing the Camera under Windows 2000 / XP
To start the camera installation, connect the Mini PenCam to the computer.
¾
Use the USB cable provided.
Note
: Insure that the camera is turned off before connecting it to the USB -
Cable.
Connect the smaller end of the USB -Cable to the USB-connection port of
the camera. Connect the larger end of the USB-Cable to a free USB-Port
located on the back of the computer
Windows XP will automatically
recognize newly attached hardware
and the Hardware-Assistant will
appear.
Choose the option “Install the
software automatically” and click on
“next”.
Once the driver components have
been completely installed, the
message “New Hardware the newly
installed hardware can now be used”
will appear.
To complete the installation, click on
“finish”
¾
The Driver consists of three components which windows will install one
after the other:
Capturing devices:
Mega Camera, WDM Image Capture
USB-Controller:
Mega Camera, WDM DSC I/O Driver
USB-Device
or
MegaCamera USB Camera
When the message “did not pass the Windows Logo Test” appears, click on
“continue anyway” to continue with the installation.
The Hardware-Assistant will
automatically search for the driver
components and integrate them into
the system.
Follow the direction on the screen.
