- Page 11 -
- Page 12 -
To switch to the High-Resolution, press the Mode-Button until the Star
symbol with ”L” appears, then press the Capture-Button. An “H” will now
appear. Press the Mode-Button once again to confirm the change
Hue Settings
You can adjust the sharpness of your pictures by turning the ring to one of
these positions, depending on the distance to the motive (
40cm - 250cm)
.
Press the mode button until the camera symbol
appears in the display.
Press he capture button to take a picture.
While the picture is being saved to the memory, the
counter will blink. During this phase no functions are
available.
Close up
: Set the ring to this position when the distance
between the camera and motive is approx. 40 cm
Distance:
Set the ring to this position when the distance
between the camera and motive is between 2,50 m – indefinite.
Taking Pictures
The counter shows the number of captures saved. When no more memory
space is available, the counter will blink and the capture button will not
function.
For the saving of pictures, the camera is equipped with an internal 128Mbit
Flash Memory. You can save approx. 50 pictures in the 1248x960 dpi
resolution and approx. 160 in the 640x480 dpi resolution.
Note:
The pictures will be internally compressed when saved. The
degree of compression and memory space may vary, depending on the
motive. The maximum number of pictures available may vary due to this.
Capturing Videos
Press the mode button until the video camera appears
in the display.
Press the capture button to start the recording. To stop
the recording, press the capture button once again.
During the recording the counter will show the number of seconds recorded.
When no more memory is available the camera will automatically stop the
recording.
The camera saves recordings to the internal 128Mbit SDRAM memory. You
can record for approx. 30 seconds when using the 624x480 dpi resolution
and approx. 120 seconds using the 304x240 dpi resolution
