8
Confirming Transducer Connection (for unit with a previous setup)
1. Turn the ATDA
On
.
2. Press the
LEFT SELECTION BUTTON
(Figure 1)
for MENU
3. Use the
SELECTION ARROW
buttons to scroll to SYSTEM MENU (2)
4. Press the
RIGHT SELECTION BUTTON
for SELECT
5. Use the
SELECTION AROW
buttons to scroll to INFORMATION (2-4)
The following screen will be displayed:
The values in the TD: line should match the full scale value of the connected transducer. For example, if an
ABRT-50S-100 transducer is connected, the text on the Auditor screen should read
TD: 100 NM
or the mathematical
equivalent, such as
TD: 73.8 FtLb.
Transducer Calibration Schedule Information
With Intellect enabled transducers, the ATDA can display information regarding the connected transducer’s serial
number, type, previous calibration date and next due-date for calibration.
From the System Information screen (2-4), press the
LEFT SELECTION BUTTON
(TD) to access the
Transducer Information screen. The following screen will be displayed:
Pressing any key while this screen is displayed will return the user to the previous System Information screen.
