CHAPTER 5
18
19
MXS 1.2 STRADA
You can choose:
n
Channel name
n
Function
n
Sensor type
n
Measure unit
n
Sampling frequency
n
Display precision
n
Specific parameters
The image below shows an example of two panels: speed panel on the left and analog chan-
nel one on the right.
MXS 1.2 Strada can be connected to your vehicle ECU. Documents explaining how to connect
your MXS 1.2 Strada to the vehicle ECU are published on our website www.aim-sportline.com.
MXS 1.2 Strada can communicates through CAN, RS232 and K-Line communication lines.
The ECU protocol includes 1500 different protocols and is constantly updated by our techni-
cians. In case you have a CAN based ECU and its protocol is not in the database, you may any-
way develop it, using the ECU Driver Builder function (see par 5.4).
To load the ECU protocol in MXS 1.2 Strada configuration:
n
enter “ECU Stream” tab
n
press “Change ECU” button
n
select “ECU Manufacturer” and “ECU Model” (in the example FORD/ MUSTANG 2010)
n
press OK
5.2.2 ECU Connection and configuration
MXS 1.2 STRADA OK.qxp_Layout 1 02/10/18 15:08 Pagina 19
