14
15
MXS 1.2 STRADA
4.5 System Information
MXS 1.2 Strada can of course be used on track thanks to the optional AiM GPS08 Module. This
is used for:
n
Lap time calculation
n
Speed calculation
n
Predictive lap time calculation
To calculate these data the system needs to know the start/finish line coordinates of the race-
track where you are racing: MXS 1.2 Strada comes with a long list of the world main tracks,
constantly updated by our technicians and automatically loaded to your PC when you run our
Analysis Software Race Studio 3.
MXS 1.2 Strada provides two track selection modes: automatic and manual.
Automatic:
MXS Strada 1.2 automatically recognizes the track you are running on, loads the start/finish
line and the possible splits coordinates and calculates lap and split times without optical/ma-
gnetic receiver.
This is the best mode in most cases.
Manual:
Allows to manually select the track from the internal database.
This mode is to be preferred when multiple track configurations are available nearby. In this
case MXS 1.2 Strada would anyway recognize the track but would need at least one complete
track lap.
4.4 GPS & Tracks management
You can scroll the list of available tracks
choosing among these options:
n
nearest: shows only tracks in a 10 km
distance
n
all: shows all tracks stored in the system
in alphabetical order
n
custom: shows only the tracks you have
previously created (learning mode)
This page shows serial number as well as
firmware and booter version of your MXS
1.2 Strada.
CHAPTER 4
MXS 1.2 STRADA OK.qxp_Layout 1 02/10/18 15:08 Pagina 15
