Point 1
: Low voltage of the coil
Point 2
: Connected to the spark plug
Point 3
: Connected to the +12V of the
battery
58
59
MXS 1.2 STRADA
CHAPTER 9
The output labelled “GRAY TACH” gives a 5-50V output that can be directly sampled by MXS
1.2 Strada.
In case the vehicle ignition system has no output you need to connect MXS 1.2 Strada to the
low voltage of the coil as shown in the following images.
Once MXS 1.2 Strada connected to RPM signal you need to enable it and set its parameters in
channels page of Race Studio 3 as explained in “Channels configuration” paragraph.
MXS 1.2 STRADA OK.qxp_Layout 1 02/10/18 15:09 Pagina 59
