CHAPTER 6
60
61
MXm
If your vehicle ECU is not included in Race Studio 3 software you can use CAN Driver
builder to create your own CAN protocol. Press CAN Protocols button shown here
above and then “New”. The panel shown below appears.
You can add a new ECU Manufacturer and/or a new ECU model.
Please note:
this Race Studio function is for expert users only and a CAN Driver buil-
der user manual can be freely downloaded from AiM website at www.aim-
sportline.com, documentation area software/firmware section.
Clicking your MXm bottom left of the software page you enter the device window
and have these options:
n
Live Measures:
to check all MXm channels;
n
Download:
to download data, see the related chapter;
n
Wi-Fi and Properties:
to manage the Wi-Fi configuration – see the related paragraph;
n
Settings
to:
n
set date format
n
enable/disable daylight time
n
set time format and time zone
n
set backlight colour
n
enable/disable night vision
n
Tracks:
to manage the tracks stored in the device memory
n
Counters:
to set each user odometer decimal places as well as reset it
n
Logo:
transmit/receive the logo that shows up when switching MXm on;
supported image format are JPEG or BMP; always use the most recent Windows
TM
versions (Windows8 or Windows10) whose graphic libraries are more updated
n
Firmware:
to check or update your MXm firmware version.
6.4 ECU Driver builder
6.5 The device window
MANUALE MXm 1.00 2018.qxp_Layout 1 01/08/18 15:08 Pagina 61
